Debris Clearance Equipment

CAT 800 Ride-On Core Collector
SQRL Pedestrian Greens Sweeper
TM5 Hi-tip Vacuum Collector
TM360XL
TM360
TM300
TM240

CAT 800 Ride-On Core Collector

Able to collect turf debris as quickly as it's created, Turfmech's CAT 800 ride-on core collector can bring significant savings in time, cost and effort to greenkeepers and grounds staff clearing-up after hollow coring and turf scarifying operations.

Key features of the CAT ( Core And Thatch) 800 are its three-wheeled design with power steering for optimum manoeuvrability; an 800mm fully-floating rotary brush/paddle collection head adjustable for height and brush intensity; and a high-dump hopper able to unload its contents in seconds over the side of a trailer, pick-up or turf work vehicle. Power is provided by a low noise Honda 20hp V-twin petrol engine with electric start.

For a lo-res PDF brochure (172kb), please click here
For a hi-res PDF brochure (1.4MB), please click here

For more information or to arrange a no-obligation demonstration of the CAT 800 on your turf, please click here to send us an email with your contact details.

SQRL Pedestrian Greens Sweeper

New from Turfmech is the SQRL Pedestrian Greens Sweeper - a self-propelled brush-type sweeper with a 60cm (24in) wide contour-following collection head and a 0.35 cu m (12.4 cu ft) high-dump hopper.

The SQRL is ideal for the removal of hollow cores, scarified material and other light. loose debris from fine turf surfaces. It will save you hours of clear-up time, releasing staff to get on with other important jobs.

For a lo-res PDF brochure (172kb) please click here.
For a hi-res PDF brochure (1.4mb) please click here.

For more information or to arrange a no-obligation demonstration of the SQRL, please click here to send us an email with your contact details.

Turfmech TM5
high-tip vacuum collector

Ideal for clearance of leaves, litter, grass and debris from parks, sports grounds and golf courses, as well as amenity areas, the TM5 has powerful vacuum/brush collection and high-tip emptying.

Suitable for use behind tractors of 35hp-plus, the TM5 has a capacity of 5 cu metres (177 cu ft) and a 1.5m (5ft) wide fully-floating suction head with a powered debris-loosening brush. The suction head has hydraulic lift and two adjustable wheels to alter working height to suit the level and quantity of debris.

Turfmech Tornado TM360XL

The Tornado TM360XL blower has the capacity to reduce litter and debris clear-up times by at least 50% compared with manual labour. Producing an intensive 150mph blast of air at ground level, the Tornado TM360XL can shift leaves, litter, grass clippings, snow, twigs, pine needles, water and countless other wet and dry debris from all surfaces. Available to suit tractors from 40hp to 60hp.

Turfmech Tornado TM360

The Tornado TM360 blower has the capacity to reduce litter and debris clear-up times by at least 50% compared with manual labour. Producing an intensive 150mph blast of air at ground level, the Tornado TM360 can shift leaves, litter, grass clippings, snow, twigs, pine needles, water and countless other wet and dry debris from all surfaces. Available to suit tractors from 30hp to 45hp.

Turfmech Tornado TM300

The Tornado TM300 blower has the capacity to reduce litter and debris clear-up times by at least 50% compared with manual labour. Producing an intensive 150mph blast of air at ground level, the Tornado TM300 can shift leaves, litter, grass clippings, snow, twigs, pine needles, water and countless other wet and dry debris from all surfaces. Available to suit tractors from 20hp to 35hp.

Turfmech Tornado TM240

The Tornado TM240 blower has the capacity to reduce litter and debris clear-up times by at least 50% compared with manual labour. Producing an intensive 150mph blast of air at ground level, the Tornado TM240 can shift leaves, litter, grass clippings, snow, twigs, pine needles, water and countless other wet and dry debris from all surfaces. Available to suit most popular ride-on front mowers, fitting in place of the rotary cutting deck.